Tap Repairs & Mixer Replacements in Randburg and Surrounding Areas
Contact UsA leaking tap might seem like a small problem, but it adds up quickly — water waste, constant dripping noise, and in some cases damage to cupboards, counters, and walls. Mixers can be just as frustrating when they start leaking at the base, wobble, lose pressure, or stop balancing hot and cold properly. Destiny Plumbing provides tap repairs and mixer replacements in Randburg and surrounding areas, helping you get back to normal without the drip-drip-drip stress.
Many tap and mixer issues come down to worn internal components, ageing seals, loose fittings, or valves that no longer shut off cleanly. Sometimes the problem is visible and easy to spot. Other times it shows up as dampness under the sink, water marks behind the basin, or a slow leak that only appears when the tap is turned on.
We handle all the common tap problems — dripping taps, leaking mixers, loose taps, faulty stop valves, and low pressure at a specific outlet. We also replace taps and mixers when repair isn’t the most sensible option, or when you’re upgrading a kitchen or bathroom and want a cleaner, more modern finish.
In Randburg homes and complexes, we often see leaks caused by older fittings and everyday wear-and-tear, especially in bathrooms and kitchens where taps get used constantly. A proper fix isn’t only about stopping the leak — it’s also about making sure the tap or mixer is secure, seals correctly, and performs the way it should.
We work in freestanding homes, complexes, and small businesses, and we keep things neat. That means careful removal and fitting, clean connections, and making sure there’s no hidden drip left behind in the cupboard once the job is “done.”
If you need tap repairs in Randburg or a clean mixer replacement, you’re in the right place.
Common Tap & Mixer Callouts We Handle
Dripping Tap (Constant Drip)
A constant drip usually points to worn internal parts or sealing issues. We repair the tap so it shuts off properly again and stops wasting water.
Leaking Mixer (Base Leak or Spout Leak)
Mixers often leak at the base, around the spout, or from internal wear. We identify the cause and repair or replace the mixer depending on what makes the most practical sense.
Loose / Wobbly Tap or Mixer
A loose mixer can cause leaks and damage over time. We secure the fitting properly and make sure the connection is stable and sealed.
Low Pressure at One Tap
If only one tap has low pressure, the cause is usually local to that outlet — restrictions, valves, or build-up. We check the likely causes and restore proper flow.
Faulty Stop Valve / Isolation Valve Issues
Sometimes the tap isn’t the main problem — the valve feeding it is. We fix or replace faulty stop valves so the system works properly and is easy to isolate in future.
Repair vs Replace (simple guidance)
Repair
If the issue is worn seals, internal components, or a secure fitting problem, repairs are usually the best option.
Replace
Replacement is often the smarter route if the fitting is old, repeatedly leaking, physically worn, or you’re upgrading the look and function of a bathroom or kitchen.
Our Client Reviews
We’re proud of the feedback we receive — because reliable plumbing and clear communication still matter.
Will definately refer him.
Why Choose Our Team
Here Are Some Simple Steps to Get Started Working With Us
Contact Us
Consultation
Client Service
Frequently Asked Questions
A drip usually means internal parts are worn or the seal isn’t shutting properly. Over time, even a small drip wastes a lot of water. We inspect and repair the tap so it closes properly again.
It depends on the cause and the condition of the fitting. If it’s an internal wear issue and the mixer is still in good shape, repair is often practical. If it’s old, repeatedly leaking, or physically worn, replacement is usually the better option.
Base leaks are often caused by worn seals, loose fittings, or internal wear that lets water escape when the tap is used. We identify the cause and repair or replace the mixer accordingly.
Yes. Small leaks often cause cupboard swelling, mouldy smells, and long-term moisture damage. If you’ve noticed dampness under the sink, it’s best to fix the source quickly.
If pressure is low at one outlet only, it’s usually a local restriction, valve issue, or build-up affecting that tap or mixer. We check the likely causes and restore proper flow.
Yes. We replace kitchen and bathroom taps and mixers neatly and securely, and make sure everything is sealed properly and functioning correctly.
Yes. We regularly work in complexes and townhouses, and we’re used to access procedures and access control. Share any gate code or caretaker process when booking.
Pricing depends on what’s wrong, what parts are needed, and whether replacement is required. We keep it straightforward: assess the issue, explain the best fix clearly, then proceed with the work.